Unskilled shooters sometimes negatively comment on equipment used in competition and how it gives competitors an unfair advantage. Rather than listen to unsubstantiated complaints, let’s analyze actual numbers.
Consider El Presidente, Jeff Cooper’s classic practical pistol shooting drill that is still used by many trainers at defensive shooting schools as an exercise. This is also a recognized USPSA classification course, CM99-11.
United States Practical Shooting Association recognizes a number of equipment divisions. Open is the unlimited, anything-goes realm of the racegun. Production requires the use of factory equipment identical to what cops and soldiers carry on duty. USPSA keeps classification data separate based on gear. How much of a difference is there in these two equipment divisions on this course of fire?
Let’s look at the minimum score (Hit Factor) needed to earn a Master classification from USPSA on CM99-11, El Presidente
- Open division: HF 10.10 (60 points in 5.94 seconds)
- Production division: HF 8.73 (60 points in 6.87 seconds)
The Open division shooter with an expensive, anything-goes race gun has only a 13.6% edge over the Production division shooter with a firearm similar to what is issued and used by police and military every day.
Assuming a perfect numerical score of 60 points, the Master class Open shooter is only 0.93 seconds faster and has a 1.37 better hit factor than a Master class Production shooter. This is the difference between a multi-thousand dollar full race gun and holster compared to a “regular” pistol and holster behind the hip. The Production gun has to be a double action or striker fired pistol (Glock, XD, etc.) as even untuned 1911 pistols or similar single actions are disallowed from this division. In USPSA Production, even Jeff Cooper’s vaunted lightly-tuned 1911 is a “rooney” gun.
Let’s look Nils Jonasson, a skilled practical competition shooter, shooting the same stage at a match with an Open/Unlimited racegun, Single Stack (a lightly tuned 1911), and Limited.
https://www.facebook.com/NilsJonasson/posts/2035961029803831
Note that the only appreciable difference in time/score was due to extra reloads with the lower-capacity Single Stack gun and even that amounted to about three seconds on a stage with several shooting positions engaging almost a dozen targets with about dozen and half shots.
Ricardo Lopez (“GunRobot”) has a breakdown showing the difference between skill classifications at the top levels.
https://firearmusernetwork.com/shooting-skill-in-competition/
Here’s a comparison between A Class and C Class
https://www.youtube.com/watch?v=ippFTSWqf2A
M Class and B class:
https://www.youtube.com/watch?v=dBe6nEPQMj8
Anyone complaining about how match grade gear gives someone a huge advantage is uneducated. There is a difference, true, but it is much less than most people realize.
Also note when Jeff Cooper designed this course in the 1960’s a hit factor of 6 was considered good and 7.2 was top notch. This was with a lightly tuned 1911. For Production division today a Master class shooter needs to beat a hit factor of 8.73 and a USPSA Grand Master needs to exceed 9.75.
If you’re foolish enough to believe that Master class Open shooter isn’t a skilled shot and only gets high scores from his equipment, note that you’ll need to shoot an El Presidente at with a hit factor over 8 (perfect score of 60 points/12 center A-zone hits around seven seconds) or so with your carry gun just to be close. Anything less proves your lack of score is due to lack of skill.
This same thing applies to rack-grade military-issue and competition Service Rifles.
https://firearmusernetwork.com/high-power-with-issue-rifles/
More:
https://firearmusernetwork.com/competition-shooting-ftw-again/
https://firearmusernetwork.com/ipsc-ftw/
https://firearmusernetwork.com/ken-hackathorn-selective-memory/
Colorado Pete
Jun 10, 2012 @ 23:26:02
Master-class Open shooters will shoot like wizards with about anything they pick up, especially if they keep in regular practice with iron-sighted guns.
LikeLike
bill price
Jun 11, 2012 @ 18:30:25
Love your logic, John. It’s like watching “MYTHBUSTERS” only with guns.
-bp
LikeLike
John M. Buol Jr.
Jun 12, 2012 @ 16:34:29
>> Master-class Open shooters will shoot like wizards with about anything they pick up….
Experienced shooters know this but it seems to miss many gun owners.
LikeLike
John M. Buol Jr.
Jun 12, 2012 @ 16:36:05
>> Love your logic, John. It’s like watching “MYTHBUSTERS” only with guns.
Classifier data is publicly available. Just a matter of putting the numbers together and confusing the issue with facts. :)
LikeLike
Colorado Pete
Jun 12, 2012 @ 22:33:49
Me:
“>> Master-class Open shooters will shoot like wizards with about anything they pick up….”
John:
“Experienced shooters know this but it seems to miss many gun owners.”
Yup. Many gun owners don’t shoot. And, have never seen a decent shooter in action, let alone a master-class shooter. No frame of reference at all.
LikeLike
Qualification and Skill | Firearm User Network
Jan 09, 2016 @ 09:35:27
Operator vs. Competitor Gun Reliability | Firearm User Network
Nov 01, 2016 @ 07:02:57
Billy Moore
Nov 02, 2016 @ 09:19:37
I shot my first sanctioned match this year. An IDPA tier 2 match with 170 ish competitors. About 50% of the time, I finish in the top 50% of the field in local matches. In this match, I was in the lower third. The competition was tough. The winner was in SSP (Stock Service Pistol) class. NOT a racegun. The 2nd place finisher? CCP. That’s Concealed Carry Pistol class. Definitely not a race gun. He outshot everyone (except one) with a carry pistol.
LikeLike
John M. Buol Jr.
Nov 02, 2016 @ 09:29:25
Thanks for adding this as it’s a great data point.
This also follows on this theme and mirrors your experience:
https://firearmusernetwork.com/skill-classification-works/
LikeLike
Billy Moore
Dec 21, 2016 @ 09:05:02
I see that my comment above is guilty of what you criticize other of…. Namely, not enough details to verify the story. So here are the details. The match was the 2016 IDPA Master’s Championship at Brock’s Gap Training Center in Hoover, AL, held on 9/10/16.
LikeLike
John M. Buol Jr.
Dec 21, 2016 @ 09:07:43
Thanks for the additional info!
LikeLike